Highlighting and Strobing
Where to place light-reflecting product, the difference between a glow and a shine, and how to avoid looking greasy.
Highlighting is the opposite half of contouring. Where a contour uses shadow to make an area recede, a highlight uses light to bring an area forward. Placed well, it gives the skin a healthy-looking glow and makes the face appear more lifted. Placed badly, it looks like sweat or, worse, a stripe of glitter across the cheekbone.
The technique became widely known as strobing in the mid-2010s, when a simpler approach to face makeup began to replace the heavy contouring of a few years earlier. The appeal was that it needed fewer products and less precision, and it suited the preference for skin that looked real.
What strobing is
Strobing means using only highlighter, without the corresponding shadow, to bring light to the high points of the face. The areas chosen are those that naturally catch light: the tops of the cheekbones, the bridge of the nose, the centre of the forehead, the cupid’s bow and the inner corners of the eyes.
The effect depends on the way light behaves. A lighter, slightly reflective surface appears closer to the viewer, so bringing light to the cheekbones makes them look more prominent. The result is a face that seems more lifted and awake, without the sculpted look of a full contour.
It is a subtler technique than contouring and generally easier to wear in ordinary daylight. It is also less forgiving of mistakes in one respect, since a highlight placed on the wrong area can emphasise texture rather than hide it.
Choosing a product
Highlighters come in several forms. A powder highlighter is easy to apply and suits oily skin, but it can emphasise dry patches. A cream or liquid highlighter blends into the skin and gives a more natural glow, which suits dry skin better. A stick is convenient and can be applied directly to the high points.
The finish matters more than the format. A highlighter with a fine, smooth shimmer looks like light on the skin. One with large glitter particles looks like craft material. The difference is visible on the face and even more obvious in a photograph.
For a natural result, a product only slightly lighter than the skin is enough. A very pale or silver highlighter can look stark, particularly on deeper skin tones, and a product with a warm or golden tone often blends more naturally.
Where to apply it
The cheekbones are the main area. A highlighter applied to the top of the cheekbone, just above where a blush would sit, catches light and lifts the face. It should stop before the outer eye, and it should be blended at the edges.
The bridge of the nose is a smaller area. A thin line of highlighter down the centre can make the nose appear straighter, and a small amount at the tip can add definition. Too much here looks greasy, especially in warm weather.
The centre of the forehead, the cupid’s bow and the inner corners of the eyes are finishing touches. Each is small, and a little goes a long way. A highlighter under the brow bone, just below the eyebrow, can lift the eye area, though a very light matte shadow often does the same job more softly.
Application technique
A light hand is essential. A small amount of product is picked up with a brush or fingertip and applied to one area at a time, then blended. A fan brush or a small, soft brush gives a light dusting, while a fingertip warms a cream product and presses it into the skin.
Powder highlighter goes on after foundation and blush, and before setting spray. Cream highlighter goes on before powder, since a dusting of translucent powder will set it and reduce the shine. Mixing a liquid highlighter into a moisturiser or foundation gives an all-over glow that is subtler than a targeted application.
Checking the result in daylight is important. A highlight that looks beautiful in dim indoor light can be too strong in daylight, and the opposite is also true. Natural light shows the skin honestly.
Glow versus shine
The line between a healthy glow and an oily shine is thin, and it comes down to texture and placement. A glow comes from a fine, smooth reflectiveness on the high points of the face. Shine comes from oil across the whole surface, particularly the centre of the face.
To keep the difference clear, highlight only the high points and let the rest of the face stay matte. If the forehead, nose and chin are already shiny, adding highlighter will not create a glow; it will add to the shine. A light dusting of translucent powder on the oily areas first, followed by highlighter on the cheekbones, gives a cleaner result.
Skin preparation matters too. Well-moisturised skin reflects light more evenly, and a highlighter over dry, flaky skin will emphasise the texture. A person with dry skin may get a better effect from a cream highlighter over a hydrated base than from a powder.
Adapting to the occasion
For everyday wear, a cream highlighter blended into the skin or a very light powder on the cheekbones is enough. The aim is to look rested rather than made up, and a subtle glow suits an office or a casual day.
For an evening event, a stronger highlight can be used, and a product with a more noticeable shimmer works under artificial light. Photographs and low light both reduce the visible detail, so a slightly stronger application is needed to read at all.
For a photograph with a flash, highlighter can reflect too strongly and create a white patch. A person who expects to be photographed with a flash should use a softer product and check a test image.
Common mistakes
Using too much is the most common error. A highlighter should be invisible as a product and visible only as light on the skin. Starting with a small amount and adding more is the right approach.
Placing it over texture is the second. A highlighter on a dry patch or a bump draws attention to it, since light makes everything more visible. Preparing the skin with moisture and choosing a suitable formula matters more than the product itself.
Using a shade that is too pale is frequent, particularly on deeper skin tones. A highlighter that is close to the skin colour, with a fine shimmer, gives a glow, while a very pale one leaves a visible streak.
Highlighting for different skin tones
The way a highlighter reads depends heavily on the skin tone. On fair skin, a pale champagne or soft pink highlighter gives a natural glow, while a silver one can look cold. On medium skin, a golden or peach-toned product blends well and warms the complexion. On deeper skin, a highlighter with a warm bronze or rich gold base looks like light on the skin, whereas a very pale product can leave a grey or white streak.
The finish matters as much as the colour. Fine, smooth shimmer works across tones, while large glitter particles tend to look uneven on deeper skin and ashy on fair skin. A cream highlighter that melts in often looks more natural than a powder, which can sit on the surface.
A person choosing a highlighter should test it in daylight and in the lighting where it will be worn. A product that looks invisible in a shop may be striking under evening lights, and one that looks dramatic in a mirror may disappear in a photograph.
The bottom line
Highlighting brings light to the high points of the face and gives the skin a healthy, lifted look. The essentials are a product with a fine shimmer, application only to the areas that naturally catch light and a light hand. A subtle glow looks like skin; a strong one looks like makeup. Starting small and checking in daylight keeps the result on the right side of that line.
Strobing as part of a routine
Strobing rarely stands alone. A little highlighter over a finished base, with blush and a defined eye, reads as light on the skin. Applied to a bare face, the same product can look odd, because there is nothing to give it context. The effect works best when the rest of the makeup provides a surface for the light to sit on.
This is why a person who tries strobing for the first time and dislikes the result should consider what is underneath rather than blaming the product. A light base, a little blush and a soft edge at the cheekbone are usually enough to make the highlight look natural.